The newly upgraded Fenix TK75 – 5100 Lumens Led Torch now blasts an astonishing 5100 lumens just under 1km (850m) by utilizing a unique quad lighting system featuring cutting-edge CREE LEDs. Easily turn on the flashlight and choose between six lighting levels and two flashing modes with the dual stainless steel side switches. Use the lock-out function to prevent accidental operation and the new innovative battery holder allows you to easily recharge the four 18650 Li-ion batteries (not included with base model) via a micro USB port. A multi-function socket allows you to attach the included shoulder strap and mount to a tripod. Waterproof and dust proof, the TK75 Flashlight is the ultimate tool for those that have the most demanding lighting needs.
SPECIFICATIONS
- Cree XHP35 HI LED with a maximum output of 5100 lumens
- Output and Runtime:
- 5100 Lumens – 2h15mins
- 2000 Lumens – 3hrs
- 1000 Lumens – 6hrs
- 450 Lumens – 17h45mins
- 150 Lumens – 46hrs
- 50 Lumens – 95hrs
- 5100 Lumens – Strobe
- 150 Lumens – SOS
- Dimensions:
- Length: 185mm
- Diameter: 52.5mm
- Head: 87.5mm
- Weight: 630g excluding battery
What’s Included:
Fenix TK75 2018 Flashlight,Micro USB Charging Cable, Shoulder strap, Spare O-ring, Lanyard.
OPERATIONS
Master switch: the right one, controls General mode and output selections.
Auxiliary switch: the left one, controls Flash mode output selections.
ON/OFF
ON
With the light turned off, press and hold the Master switch for 0.5 seconds to enter General mode, press and hold the Auxiliary switch to enter Flash mode.
OFF
With the light turned on, press and hold the Master or Auxiliary switch to turn off the light.
Mode Switching
In General mode, single click the Auxiliary switch to enter Flash mode.
In Flash mode, single click the Master switch to enter General mode.
Output Selection
With the light on General mode, single click the Master switch to cycle through Eco→Low→Med→High I→ High II→Turbo.
With the light on Flash mode, single click the Auxiliary switch to cycle through Strobe→SOS.
Instant Turbo
In any status with the light unlocked, press and hold the Master switch for 1.2 seconds to enter Turbo mode, click once on any switch to enter the last-used General mode.
Instant Strobe
With the light off and unlocked, press and hold the Auxiliary switch for 0.5 seconds to enter Strobe mode, or single click the Auxiliary switch on General mode to enter Strobe mode.
Intelligent Memory Circuit
The light memorizes the last selected brightness level on General mode. When turned on again the previously used brightness level will be recalled.
Battery Level Indication
When the light is off, single click the Auxiliary switch, the battery level indicator between the switches will display the battery status for 3 seconds. (Single click the blue button on the battery holder to check the battery status with the battery level indicator displayed).
- Green constant on: saturated
- Green flashes: sufficient
- Red constant on: poor
- Red flashes: critical
*This only works on 18650 Li-ion rechargeable batteries.
Lockout Function
Lock: With the light unlocked, simultaneously press the two switches for 3 seconds, the light will blink twice to indicate locked status.
Unlock: With the light is locked, simultaneously press the two switches for 3 seconds, the light will be unlocked and activated on last used brightness.
In locked status, clicking or pressing the switches will activate 2 one-second blinks to indicate locked status.
Intelligent Protection
The light will accumulate a lot of heat when it is working at Turbo mode. When the light is overheated up to 65C or above, the flashlight will automatically downshift the output to 2500 lumens; when the temperature is lower than 65C, after 3-minute working on Turbo, the light will slowly downshift to 2500 lumens within 30 minutes, to protect from high surface temperature.
Low-voltage Warning
When the voltage level drops below the preset level with the light switched on, low voltage warning will be activated automatically, then the battery level indicator between the switches will display red to remind battery replacement or charging. The flashlight is programmed to step down automatically to a lower brightness level until Eco output is reached. To ensure normal use, the flashlight will not turn off until the battery level runs out or once the battery over-discharging protection activates.
Note: This only works on 18650 Li-ion battery.
Charging
The battery holder features charging function with a standard Micro USB port.
1. Take the battery holder out of the light, plug the USB port of the charging cable into any USB power supply. and plug the Micro USB side of the charging cable into the charging port of the battery holder.
2. The charging indicator will display red while charging, and will turn to green when fully charged.
Note: Avoid conductive object like coins, screws and keys when takes the battery holder out of the light, to protect from circuit damage caused by electrode short circuit.