The Fenix TK47UE – 3200 Lumens Led Torch Tactical Duty Flashlight, with its long range illumination, is designed with the security and law-enforcement professional in mind. Fitted with a Cree XHP70 LED, resulting in a beam of almost 1339 feet (408m). The TK47UE Tactical Duty flashlight also includes a multi-funtional tail light that features a red light for signaling and a soft lantern light for duties such as report writing. This independently controlled tail light has four modes including a low-lumen white or red light for reading and a red Flash/SOS. The white LED provides better color rendering allowing for quicker identification of objects. We believe you’ll find this light to be perfect for security and law-enforcement professionals’ daily activities. NOTE: The light will not work with flat-top 18650s. We recommend any of the ARB-L18 series from Fenix.
SPECIFICATIONS
- Cree XHP70 LED with a maximum output of 3200 lumens
- Output and Runtime:
- 3200 Lumens – 1h
- 1000 Lumens – 3h 20mins
- 350 Lumens – 11h 20mins
- 100 Lumens – 46hrs
- 20 Lumens – 170hrs
- 3200 Lumens – Strobe
- 30 Lumens – 43h 30mins
- 1.5 Lumens – 150hrs Red Light
- 1.5 Lumens – Red Flash
- 1.5 Lumens – Red SOS
- Dimensions:
- Length: 266.2mm
- Diameter: 61.5mm
- Head: 28.6mm
- Weight: 365g excluding battery
What’s Included:
Fenix TK47UE Flashlight,Lanyard,Holster, Spare O-ring.
OPERATIONS
ON/OFF
In unlocked status, press and hold the side switch for 0.5 seconds to turn on/off the headlight.
Press and hold the tail switch for 0.5 seconds to turn on/off the tail light.
Output Selection
Headlight: When the headlight is on, single click the side switch to cycle through Turbo→Eco→ Low→Med→High.
Tail light: When the tail light is on, single click the tail switch to cycle through Moonlight→White light→Red light→Red flash→Red SOS.
Strobe
In unlocked status, press and hold the tail switch for 1.5 seconds to activate Strobe. Single click the side switch once again, the light will return to General brightness.
Lockout Function
Lock: When the headlight is off and unlocked, double click the side switch; the light will blink at Low twice, indicating the headlight is locked.
Unlock: When the headlight is off and locked, double click the side switch, the light will be unlocked and turned on the last used output level.
Note: In locked status, the light only responds to unlocking operation; single click the side switch, the headlight will blink twice to remind the light is under locked status.
Intelligent Memory Circuit
The headlight memorizes the last brightness level used in the General mode. The next time it is turned on, it will recall the previously used General brightness level.
The tail light is defaulted on Moonlight each time it is turned on again.
Intelligent Overheat Protection
The light will accumulate a lot of heat when used at Turbo output level for extended periods. When the light reaches a temperature of 65C or above, the light will automatically step down by a few lumens to reduce temperature. When the temperature is reduced, the output will gradually return to Turbo output level.
Low-voltage Downshift Function
When the voltage level drops below the preset level in working condition, the flashlight will start downshifting to lower brightness levels until Low output is reached, in order to remind you to replace the batteries. To ensure normal use, the light will not turn off and will work until the over-discharge function stops the battery from working.