The Fenix SD11 – 1000 Lumens Diving Led Torch is specifically designed for underwater photography and video shooting. The advanced “R+” mode is made for better color rendering with a combination of neutral white LED light and red LED light. R+ mode makes the SD11 an effective light for underwater viewing, photographing, video shooting and even photography on the shore since red light is extraordinarily scarce. Featuring a soft wide beam and R+, SD11 is fit for both illumination and photography on shore or in water.
SPECIFICATIONS
- Cree XM-L2 (T6) neutral white LED with a maximum output of 1000 lumens
- Output and Runtime:
- 1000 Lumens – 2hrs
- 500 Lumens – 3h40mins
- 250 Lumens – 3hrs
- Dimensions:
- Length: 138mm
- Diameter: 26mm
- Head: 34mm
- Weight: 160g excluding battery
What’s Included:
Fenix SD11 Flashlight,Flashlight clip& camera mount, Diving lanyard, Spare O-ring, Brand ring.
OPERATIONS
Rotate the magnetic ring to turn on/off the light, to select the wanted output level, and to check the battery level. From left to right: Battery level, R+, Off, White low, White high.
Battery Level Indication
Rotate the magnetic ring to the battery icon. There are three statuses:
Red light constantly on: Sufficient
Red light slow flash: Low
Red light quick flash: Critical, replace the battery soon as possible
Safe Diving Illumination Design
1. If the detected voltage is lower than the preset voltage when used on High output or Low output, the output will automatically step down to prolong the runtime.
2. If the detected voltage is lower than the preset voltage when used on the combination light mode, the red light will go out and the white light will automatically step down, thus to remind of battery replacement as soon as possible.
Intelligent Overheat Protection
The light will accumulate a lot of heat when used at High output level for extended periods. If the light reaches a temperature of 65C or above, it will automatically step down by a few lumens until 700 lumens output is reached. When the temperature is reduced, the output will gradually return to High output level.