The Fenix E25 Ultimate Edition LED Flashlight is the very first ultra-bright AA flashlight which has intelligent drive circuitry. The Cree XP-L LED makes the E25UE compatible with 14500 rechargeable Li-ion batteries allowing it to shine brighter at an amazing max of 1000 lumens. Dual side switches let you quickly choose between flashing modes or the five brightness levels.
SPECIFICATIONS
- Cree XP-L V5 LED with a maximum output of 1000 lumens
- Output and Runtime:
- 1000 Lumens – 50mins
- 350 Lumens – 2h15mins
- 160 Lumens – 5h5mins
- 50 Lumens – 16h30mins
- 5 Lumens – 95hrs
- 350/1000 Lumens – Strobe
- 160 Lumens – SOS
- Dimensions:
- Length: 161mm
- Diameter: 19.6mm
- Head: 25.4mm
- Weight: 87g excluding battery
What’s Included:
Fenix E25UE Flashlight,Spare O-ring, Lanyard, 2 AA batteries.
OPERATIONS
Master switch: controls General mode and output selection.
Auxiliary switch: controls Flash mode and output selection.
ON
With the light off, single-click the master switch to enter into General mode, single-click the auxiliary switch to enter into Flash mode.
OFF
With the light on, press and hold the master or the auxiliary switch for 0.5 seconds to turn off the light.
Mode Switching
In General mode, single-click the auxiliary switch to enter into Flash mode.
In Flash mode, single-click the master switch to enter into General mode.
Output Selection
In General mode, single-click the master switch to cycle through Eco→Low→Mid→High→Turbo.
In Flash mode, single-click the auxiliary switch to cycle through Strobe→SOS.
Lock and Unlock Function
Lock: Simultaneously press the two switches for 3 seconds (when the light is unlocked), the light will blink twice at Low and then go out, the light is locked.
Unlock: Simultaneously press the two switches for 3 seconds (when the light is locked), the light will be unlocked and power on the last-used output level.
Note: In locked status, the light only responds unlocking operation, press on any switch, the light will blink twice at Low to remind the light is under locked status.
Intelligent Memory Circuit
The flashlight memorizes the last brightness level used in the General mode, the next time it is turned on, it will recall that previously used brightness level. As Flash mode, each time the light will work at Strobe mode.
Over-heat Protection
The flashlight will accumulate a lot of heat when it is working at Turbo and High brightness level. When it works at Turbo for 3 minutes or at High for 10 minutes, the flashlight will automatically adjust the output to prevent the light from overheating. If the Turbo or High output is needed, please reset it again. But the flashlight could be damaged or the normal service life could be shortened because of continuous use like this.