The Fenix TK35 – 1300 Lumens Led Torch has been upgraded with a far-reaching beam that throws light a maximum distance of 525 yards (480 meters). Utilizing a CREE XHP35 HI neutral white LED, it delivers max 1300 lumen output from two 18650 batteries—which are rechargeable via its micro USB charging battery holder. Seven outputs including strobe and SOS are controlled by the dual tail switches. Durable, reliable and balanced for easy carry, the Fenix TK35 Flashlight excels at every level.
SPECIFICATIONS
- Cree XHP35 HI neutral white LED with a maximum output of 1300 lumens
- Output and Runtime:
- 1300 Lumens – 2hrs
- 500 Lumens – 6h45mins
- 150 Lumens – 21hrs
- 50 Lumens – 60hrs
- 10 Lumens – 240hrs
- 1300 Lumens – Strobe
- 50 Lumens – SOS
- Dimensions:
- Length: 159.5mm
- Diameter: 43mm
- Head: 48mm
- Weight: 271g excluding battery
What’s Included:
Fenix TK35 2018 Flashlight,Lanyard,Holster, Spare O-ring, USB charging cable.
OPERATIONS
Switches
The big one is the tactical switch.
The small one is the functional switch.
ON/OFF
Tap the Tactical switch to turn on the light, release it the light will go out.
Fully press the Tactical switch to constantly turn on the light, press once again the light will go out.
Mode Switching
In General mode, press and hold the Functional switch for 1 second to enter Flash mode.
In Flash mode, press and hold the Functional switch for 1 second to the last used output in General mode.
Output Selection
In General mode, single click the Functional switch to cycle through Eco→Low→Med→High→Turbo.
In Flash mode, single click the Functional switch to cycle through Strobe→SOS.
Instant Strobe
With the light switched off, press the Functional switch to enter instant Strobe, release it the light will return to off status. With the light switched on instant Strobe, then simultaneously press the Tactical switch to constantly lock on Strobe.
Intelligent Memory Circuit
The light memorizes the last selected brightness level on General mode. When turned on again the previously used brightness level will be recalled. Strobe is factory defaulted each time the light is turned on Flash mode.
Boot-up Battery Level Indication
Each time the light is turned on, the battery level indicator will automatically display the battery status for 3 seconds
Green constant on: saturated
Green flashes: sufficient
Red constant on: poor
Red flashes: critical
Note: This only works on rechargeable LI-ion 18650 battery.
Intelligent Protection
The light will accumulate a lot of heat when it is working at Turbo mode. When the light is overheated up to 65C or above, the flashlight will automatically step down a few lumens to reduce the temperature; when the temperature is lower than 65C, the output will gradually return to Turbo output level.
Low-voltage Warning
When the voltage level drops below the preset level with the light switched on, low voltage warning will be activated automatically, then the battery level indicator on the Functional switch will flash red to remind battery replacement or charging. The flashlight is programmed to step down automatically to a lower brightness level until Eco output is reached. To ensure normal use, the flashlight will not turn off until the battery level runs out or once the battery over-discharging protection activates.
Note: This only works on 18650 Li-ion battery.
Charging
The battery holder features charging function with a standard Micro USB port.
1. Take the battery holder out of the light, plug the USB port of the charging cable into any USB power supply. and plug the Micro USB side of the charging cable into the charging port of the battery holder.
2. The charging indicator will display red while charging, and will turn to solid green when fully charged.
Note: Avoid conductive object like coins, screws and keys when takes the battery holder out of the light, to protect from circuit damage caused by electrode short circuit.