The Fenix FD30 LED Torch is fitted with a Fenix independently designed innovative dual reflector optical system. Rotating the focusing ring 360° moves the head and the reflector forward and backward from the LED
SPECIFICATIONS
- Cree XP-L HI LED with a maximum output of 900 lumens
- Output and Runtime:
- 900 Lumens – 2hrs (Turbo)
- 350 Lumens – 4h30mins
- 150 Lumens – 11hrs
- 50 Lumen – 40h30mins
- 8 Lumens – 170hrs
- 900 Lumens – Strobe
- Dimensions:
- Length: 140.5mm
- Diameter: 23mm
- Height: 25.4mm
- Weight: 96g excluding battery
What’s Included:
Fenix FD30 focusing flashlight, O-ring for water seal, Holster, Lanyard, Spare rubber switch boot, Body clip.
OPERATIONS
The tail cap switch is the tactical switch, and the side button switch is the functional switch.
ON/OFF
Tap the tactical switch to turn on the light momentarily, release it and the light will go out.
Click the tactical switch to turn on the light constantly, click once again to switch off the light.
Output Selection
With the light on, by single clicking the functional switch continually, the light will cycle through Turbo→Eco→Low→Med→High.
Strobe
With the light on, press and hold the functional switch for 0.5 seconds to activate Strobe; with another single click the light will return to previously used General brightness level.
Spotlight and Floodlight Adjustment
The factory default will be total floodlight. Rotate the focusing ring to regulate the dual reflector, thus changing between spotlight and floodlight.
Intelligent Memory Circuit
The flashlight memorizes the last brightness level used in the General mode. The next time it is turned on, it will recall the previously used General brightness level.
Intelligent Overheat Protection
The light will accumulate a lot of heat when Turbo output level is repeatedly selected for extended periods. If the light reaches a temperature of 65C, it will automatically downshift to High output level. Turbo can be re-selected if needed, but service life could be shortened or the flashlight could be damaged permanently.
Low-voltage Downshift Function
When the voltage level drops below the preset level, the flashlight is programmed to downshift to lower brightness levels until Low output is reached. When Low output mode is reached, the flashlight blinks three times every five minutes to remind you to charge the light or replace the battery. To ensure normal use, the flashlight will not turn off and will work until the battery is completely discharged.