The Fenix TK35UE – 3200 Lumens Led Torch is newly upgraded with the latest Cree XHP70 LED which delivers a maximum output of 3200 lumens a distance of 300m. The innovative toggle switch allows you to quickly switch between tactical mode, outdoor mode and the lock-out function. The battery indicator lets you know if the two 18650 Li-ion batteries (not included) are in need of charging via the USB port on the battery holder. Waterproof and dust-proof with a max runtime of 152 hours, the TK35UE flashlight is ready to easily meet the needs of any outdoor enthusiast as well as military and law enforcement.
SPECIFICATIONS
- Cree XHP70 LED with a maximum output of 3200 lumens
- Output and Runtime:
- 3200 Lumens – 1h 30mins
- 2000 Lumens – 2hrs
- 1000 Lumens – 3h 40mins
- 350 Lumens – 10h 50mins
- 100 Lumens – 38h 40mins
- 20 Lumens – 152hrs
- 3200 Lumens – Strobe
- 100 Lumens – SOS
- Dimensions:
- Length: 161mm
- Head: 50mm
- Weight: 286g excluding battery
What’s Included:
Fenix TK35UE 2018 Flashlight,Lanyard,Holster, Spare O-ring, USB charging cable.
OPERATIONS
Switches
The big one is the tactical switch.
The small one is the functional switch.
The toggle switch is for mode switching.
Mode Switching
In any state, turn the toggle switch from left to right, to select between tactical, outdoor and lockout modes.
Tactical Mode
Tap the Tactical switch to momentarily turn on the light, release it the light will go out. Fully press the Tactical switch to constantly turn on the light, press once again to turn off the light.
With the light switched on, press and hold the Functional switch over 1 second to enter Strobe, press and hold the Functional switch again for 1 second to return to General mode.
In Tactical mode, only Turbo on General mode and Strobe on Flash mode are available.
Outdoor Mode
Tap the Tactical switch to momentarily turn on the light, release it the light will go out. Fully press the Tactical switch to constantly turn on the light, press once again to turn off the light.
With the light switched on, single click the Functional switch to cycle through Eco→Low→Med→High→Turbo. Press and hold the Functional switch over 1 second to enter Flash mode, press and hold the Functional switch again for 1 second to return to General mode.
In Flash mode, single click the Functional switch to cycle through Strobe→SOS.
Lockout Mode
In any state, turn the toggle switch to off mark, the light will go out and enter lockout status, then the Tactical and Functional switches don’t work. For security, when Tactical switch is switched on, the battery level indicator on the Functional switch will be lit on to remind that Tactical switch is switched on, turn off the Tactical switch, the battery level indicator will go out.
Instant Strobe
With the light switched off, press the Functional switch to enter instant Strobe, release it the light will return to off status. With the light switched on instant Strobe, then simultaneously press the Tactical switch to constantly lock on Strobe mode.
Intelligent Memory Circuit
The light memorizes the last selected brightness level on Outdoor mode. When turned on again the previously used brightness level will be recalled. Strobe is factory defaulted each time the light is turned on Flash mode.
Boot-up Battery Level Indication
Each time the light is turned on, the battery level indicator will automatically display the battery status for 3 seconds
Green constant on: saturated
Green flashes: sufficient
Red constant on: poor
Red flashes: critical
Note: This only works on rechargeable LI-ion 18650 battery
Intelligent Protection
The light will accumulate a lot of heat when it is working at Turbo mode. When the light is overheated up to 65C or above, the flashlight will automatically step down a few lumens to reduce the temperature; when the temperature is lower than 65C, the output will gradually return to Turbo output level.
Low-voltage Warning
When the voltage level drops below the preset level with the light switched on, low voltage warning will be activated automatically, then the battery level indicator on the Functional switch will flash red to remind battery replacement or charging. The flashlight is programmed to step down automatically to a lower brightness level until Eco output is reached. To ensure normal use, the flashlight will not turn off until the battery level runs out or once the battery over-discharging protection activates.
Note: This only works on 18650 Li-ion battery.
Charging
The battery holder features charging function with a standard Micro USB port.
1. Take the battery holder out of the light, plug the USB port of the charging cable into any USB power supply. and plug the Micro USB side of the charging cable into the charging port of the battery holder.
2. The charging indicator will display red while charging, and will turn to solid green when fully charged.
Note: Avoid conductive object like coins, screws and keys when takes the battery holder out of the light, to protect from circuit damage caused by electrode short circuit.