The recently re-dsegined Fenix TK32 – 1000 Lumens Led Torch Flashlight now delivers a whopping output of up to 1000 lumens. It has a very long beam throw up to 422 metres and a substantial output increase in the red and green LEDs making it a perfect choice for hunting and search and rescue. Eight modes deliver four brightness levels and two extra colour modes, each having two brightness levels. The flashlight light is also conveniently operated by its dual tail switch, and is waterproof to 2 meters.
SPECIFICATIONS & FEATURES
- Long Throw of 422m
- 3 Colour LED - White, Green, Red
- 8 Modes
- 4 Brightness Levels
- Duel Tail Switch
- Waterproof to 2m
- Cree XP-L HI V3 white light
- XQ-E colored light LED with a maximum output of 1000 lumens
Output and Runtime
- 1000 Lumens – 1h 50mins
- 350 Lumens – 4h 45mins
- 100 Lumens – 15h 25mins
- 8 Lumens – 170hrS
- 105 Lumens – 4h 15mins
- 15 Lumens – 65hrs
- 165 Lumens – 5h 30mins
- 30 Lumens – 40hrs
Dimensions
- Length: 159mm
- Diameter: 25.4mm
- Head: 52mm
- Weight: 175g excluding battery
Included
- Fenix TK32 2016 Flashlight,Lanyard,Holster, Spare O-ring.
OPERATIONS
Dual Tail Switch
The round one of the tail switch is the tactical switch, and the oval one of the tail switch is the function switch.
ON/OFF
Tap the tactical switch to turn on the light, release it the light will go out, fully press the tactical switch to lock and activate the light constantly, press once again to unlock and turn off the light.
Output Selection
In White light mode, single-click the function switch to cycle the light through Low→Mid→High→Turbo.
In White light mode, press and hold the function switch for 0.8 seconds to enter Colored light mode (Red High is default). Single-click the function switch to cycle the light through Red High→Red Low→Green High→Green Low, press and hold the function switch for 0.8 seconds again to return to the memorized white light mode.
With the light off, press the function switch to enter Colored light mode (Red High is default), release it the light will go out. Press and release the function switch fast to select needed colored light, simultaneously press the tactical switch to lock the selected colored light and enters the Colored light mode.
Note: The light will automatically memorizes the previously used brightness level of White Light mode, when it is turned on again.
Intelligent Over-heat Protection
The light will accumulate a lot of heat when it is working at High output. When the light is overheated internally up to 65C or above, the flashlight will automatically adjust the output to prevent the light from overheating.
Low-voltage Warning Function
If low voltage is detected, the flashlight is programmed to downshift to a lower brightness level until to Low brightness level. When this happens at Low output mode, the flashlight blinks three times every five minutes to remind you to replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work until the battery runs out completely.