The Fenix TK20R micro-USB rechargeable flashlight delivers a maximum beam distance of over 1000 feet (310m) by utilizing the CREE XPL HI V3 LED with a maximum output of 1000 lumens.
SPECIFICATIONS
- CREE XPL HI V3 LED with a maximum output of 1000 lumens
- Output and Runtime:
- Output and Runtime:
- 1000 Lumens – 2 hrs
- 350 Lumens – 4 hrs
- 150 Lumens – 11 hrs
- 10 Lumens – 160 hrs
- Dimensions:
- Length: 151.5mm
- Diameter: 25mm
- Head: 34mm
- Weight: 141g excluding battery
What’s Included:
Fenix LED Torch, 3.6V / 2900mAh 18650 rechargeable battery, USB charging cable, holster, lanyard, spare O-ring.
OPERATIONS
The tail cap switch is the tactical switch, and the side button switch is the functional switch.
ON/OFF
Tap the tactical switch to turn on the light momentarily, release it and the light will go out.
Fully press the tactical switch to turn on the light constantly, press once again the light to switch off the light.
Output Selection
With the light on, single click the functional switch. The light will cycle through Turbo→Low→Med→High.
Strobe
With the light on, press and hold the functional switch for 0.5 seconds to activate Strobe, another single click the light will return to previously used General brightness level.
Intelligent Memory Circuit
The flashlight memorizes the last brightness level used in the General mode. The next time it is turned on, it will recall the previously used General brightness level.
Intelligent Overheat Protection
The light will accumulate a lot of heat when used at Turbo output level for extended periods. When the light reaches a temperature of 65C or above, the light will automatically step down by a few lumens to reduce temperature. When the temperature is reduced, the output will gradually return to the maximum brightness of the previously selected output level.
Battery Level Indication
When the light is turned on, the battery level indicator around the side switch will display the battery status for 3 seconds.
Green light constant-on: sufficient
Red light constant-on: poor
Red light flashes: critical
When the voltage level drops below the preset level in working condition, the battery indicator is programmed to flash red to remind you of charging, and the flashlight will gradually downshift to Low output. To ensure normal use, the light will not turn off automatically and will work until the battery runs out completely.
Charging
First plug the USB port of the charging cable into an electrical outlet, then connect the Micro USB port of the charging cable to the light. The indicator light will display red while charging, and will turn to solid green when fully charged. The normal charging time is about 3.5 hours. Input voltage: 5V, recommended current: 1A – 1.3A.
Note:
1. Once charging is completed, be sure to close the anti-dust cover.
2. Charging with the light switched on is not recommended. Doing so may cause extended charging time or less fully charged battery.
3. Recharge a stored TK20R every four months to maintain optimum performance of the battery.