The Fenix RC05 – 300 Lumens Rechargeable LED Torch is a must have for hiking, camping or every day carry. This rechargeable LED flashlight features a maximum 300 lumens and is powered by a single 14500 rechargeable Li-ion battery, or can use a standard AA battery as a backup at reduced performance and no recharge ability. Recharging the flashlight is easy with the magnetic, dual-purpose Micro-USB charging cable. The two-position clip is great for different carry positions and the magnetic suction bottom allows the flashlight to be mounted to metal for limitless lighting options.
SPECIFICATIONS
- Cree XP-G2 R5 LED with a maximum output of 300 lumens
- Output and Runtime:
- 300 Lumens – 55mins
- 150 Lumens – 2hrs
- 50 Lumens – 6hrs
- 5 Lumens - 40hrs
- 300 Lumens - Strobe
- Dimensions:
- Length: 94mm
- Diameter: 19mm
- Weight: 36.8g excluding battery
What’s Included:
Fenix RC05 Flashlight, Lanyard, Spare O-ring, Two-position body clip, charging cable, 800mAh 14500 rechargeable Li-ion battery.
OPERATIONS
ON/OFF
When the light is off and unlocked, press and hold the side switch for 0.5 seconds to turn it on. When the light is on, press and hold the side switch for 0.5 seconds to turn it off.
Output Selection
With the light on, single-click the side switch to cycle through Low→Mid→High→Turbo.
Strobe
Under unlocked state, press and hold the side switch for 1.2 seconds to enter into Strobe, click again to turn back to previously used General brightness level.
Lock-out Function
Lock: When the light is off and unlocked, double-click the side switch in 0.5 seconds, the light will blink at Mid twice and then go out, indicating the light is locked.
Unlock: When the light is off and locked, double-click the side switch in 0.5 seconds, the light will be unlocked and power on the last-used output level.
Note: In locked state, the light only responds unlocking operation, press the side switch, the light will blink twice to remind the light is under locked state.
Intelligent Memory Circuit
The flashlight memorizes the last brightness level used in the General mode, the next time it is turned on, it will recall that previously used General brightness level.
Over-heat Protection
The flashlight will accumulate a lot of heat when it is working at Turbo brightness level. When it works at Turbo for 5 minutes, the flashlight will automatically downshift to High output to prevent the light from overheating. If the Turbo output is needed, please reset it again. But the flashlight could be damaged or the normal service life could be shortened because of continuous use like this.
Low-voltage Warning Function
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level. When this happens in Low output mode, the flashlight blinks three times every five minutes to remind you to charge the light or replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work until the over-discharge function stops the battery from working.
Note: This only works on 14500 rechargeable Li-ion battery. When the voltage of 14500 battery is detected lower than 3V, low-voltage warning function will fail if the flashlight is turned on again.