The Fenix TK15UE – 1000 Lumens Tactical Led Torch defines extreme ruggedness. This light employs the new CREE XP-L HI V3 LED technology, which allows the light to throw an impressive beam distance of over 1000 feet (325 meters) and deliver a maximum output of 1000 lumens. With an impact resistant strike face bezel, the TK15UE is ready for heavy duty action. Complete with a tactical tail switch with momentary capability and a side switch to access four brightness levels and strobe, this tactical light is built to assist law enforcement, search and rescue, military and more.
SPECIFICATIONS
- Cree XP-L HI V3 LED with a maximum output of 1000 lumens
- Output and Runtime:
- 1000 Lumens – 2hrs
- 350 Lumens – 4h20mins
- 150 Lumens – 11h30mins
- 10 Lumens – 135hrs
- 1000 Lumens – Strobe
- Dimensions:
- Length: 142.5mm
- Diameter: 25.4mm
- Head: 34mm
- Weight: 141g excluding battery
What’s Included:
Fenix TK15UE Flashlight,Lanyard, Holster, Spare O-ring, Spare rubber boot switch.
OPERATIONS
The tail switch is tactical switch, the side switch is functional switch.
ON/OFF
Tap the tactical tail switch to momentarily turn on the light, release it the light will go out.
Fully press the tactical switch to turn on the light constantly, press again to turn off the light.
Output Selection
With the light on, single-click the functional switch to cycle through Turbo→Low→Mid→High.
Strobe
With the light on, press and hold the functional switch for 0.5 seconds to enter into the Strobe mode, click once again to return back to General mode.
Intelligent Memory Circuit
The flashlight memorizes the last brightness used in the General mode, the next time it is turned on, it will recall that previously used brightness level.
Over-heat Protection
The flashlight will accumulate a lot of heat when it is working at Turbo. When the light is overheated up to 65? or above, the flashlight will automatically adjust the output in stepped way to prevent the light from overheating.
Low-voltage Warning Function
If low voltage is detected, the flashlight is programmed to downshift to a lower brightness level until to Low brightness level. When this happens at Low output mode, the flashlight blinks three times every five minutes to remind you to replace the battery. To ensure normal use, the flashlight will not turn off automatically and will work until the battery runs out completely.